Search for products
W225 Vigor Units now available!
- Automatic bypass valve
- Touchscreen display
- Adjustable air quantity
- Constant flow control
- An intelligent frost protection
- Maximum capacity 225 m³/h
- Modular preheater
The right solution for every installation
Universal Dry Verge
The Universal system is available in three colours Grey, Brown and Terracotta and is made up of just four components: • The starter unit / Eaves closure which can be fitted before or after the gutter is installed. • The Batten Bracket (pre-made, predetermined overhang length) so battens can be cut flush to the barge board or gable wall. • Ambi handed units to keep stocking simple and easy to order, super deep-water channel to prevent water drip and gable wall staining. • Ridge end cap which suits the half round/Segmental and Monier Universal Angle ridge, also compliments the Ubbink Ventilated Dry Ridge System. The Ubbink Ambi Handed DRY VERGE SYSTEM was designed not only to comply with BS5534 but also to withstand the independent testing to BS8612 by the Building Research Establishment.
As the only zero carbon footprint mass flow ducting on the UK market, Aerfoam is used to move large volumes of air not only between the terminals and the mechanical ventilation unit, but also to the distribution manifold of the Air Excellent system. This system is easy to install, can be cut to length in the loft area and comes with airtight connections for a high performing mechanical ventilation system (MVHR).
We offer a range of hooded and In-line pitch roof tile and slate void vents. The UB19 Hooded range has the largest free vent area on the market of 22,000mm² meaning less vents are needed to meet the current regulations. The UB62 In-line models suit interlocking tiles, plain tiles and slates. All Ubbink void vents can be easily converted to accept ducting to terminal fans and soil pipes with the appropriate adaptors.